www.wildviewcam.com
Toll Free 888-304-6125
11
SETUP AND PROGRAMMING
When the camera is first turned on, the internal LCD screen displays the
camera status. The following information is present on this screen.
Definitions
Cam:
To set which mode you want the camera to be in.
TEST = Test mode
OFF = Power Off mode
ON = Active Passive Infrared mode / Power On mode
Time out:
To set the amount of time the camera will sleep between PIR
triggering.
20s = 20 Seconds
1m = 1 minute
5m = 5 minutes
10m = 10 minutes
Resolution:
The resolution selection that you have chosen.
High (HI) = 8.0 Megapixels
Low (LO) = 5.0 Megapixels
