WSG18SFP Switch User Manual
WSG18SFP Switch User Manual
Page 7 of 27
System Configuration
This page shows system configuration information.
MAC Address: hardware address assigned by manufacturer (default).
S/W Version: switch’s firmware version.
H/W Version: switch’s Hardware version.
DHCP Enabled: click to enable DHCP
Fallback IP address: assign the IP address manually, the default IP is 192.168.2.1
Fallback Subnet Mask: assign the subnet mask to the IP address
Fallback Gateway: assign the network gateway, the default gateway is 0.0.0.0.
Management VLAN: ID of the configured VLAN (1-4094) to manage the switch. By default, all ports on the
switch are members of VLAN 1. However, if the management VLAN is changed, the management station
should be attached to a port belonging to this VLAN.
Name: type in a new user name (default value is ‘admin’).
Password: type in a new password (default value is ‘admin’).
NMP Enabled: enables or disables SNMP on the switch. Supports SNMP version 1and 2c management
clients.
SNMP Trap Destination: IP address of the trap manager to receive notification messages from this switch.
Traps indicating status changes are issued by the switch to specified trap managers. Specify trap
managers so that key events are reported by this switch to your management station.
SNMP Read Community: community string serves as a password and allows access to the SNMP
database on this switch.
SNMP Trap Community: community string sent with the notification operation.
Ports Configuration
