Step 7:
Locate the 2 Stretcher
Boards (same size) and insert four
Cam Fittings into the back of each
Stretcher.
X 2
5”
x 8
Hardware needed for next step
Cam Fitting
Step 8:
Assemble the Bed Cabinet face down with the bottom of the bed nearer
the wall to which it will be installed. Note the “Front Stretcher” (illustrated
below) should be positioned so the Cam Fittings are at the bottom of the bed.
IMPORTANT! Tighten the cam fittings with a hand screw driver by turning the
Phillips head clockwise 1/2 turn to tight.
HELPFUL HINT: It is easier to tighten the Cam Fittings if the two bed parts are
snug together.
Front Stretcher
Cam fittings on bottom
Optional Head Board Shelf for extra deep
Illustration 5
1/2 Turn to tight
Cam Fitting
Connecting Bolt
Rear Stretcher
Head Board
Side Boards
Bed Bottom
Page 5
Summary of Contents for Wallbeds
Page 2: ......
