Step 14:
Locate the Front
Panel(s) and lay them on the
floor face down (finished side).
Position them in front of where
the Bed Cabinet was installed
and leave enough room to work
around them.
Head/Foot rail
Bottom rail
Side rail
HELPFUL HINT: Side mount beds
can be slept on in either direction.
The rails referred to as “Head/Foot
rail” can act as either the head or
foot of the bed, depending on which
way a sleeper lies.
Step 15:
Arrange the mattress
rails on the face panels as shown.
Rails are in the long white card
board box.
Head/Foot rail
Your bed cabinet is installed on this side
HELPFUL HINT: Two of the pan-
els have holes drilled for handles.
Those panels should be the middle
two panels with the holes next to
each other and away from the bed
cabinet installed on your wall.
Holes for handles
Your bed cabinet is installed on this side
Important note: It is critical to orient the bed face panels and bed rails in the next 5 steps correctly. All of the ren-
derings (drawings) in the next 5 steps assume that you are looking away from the wall you just installed the cabinet
against in the previous step. There is a note under each of the renderings indicating “your bed cabinet installed on this
side” which indicates that is where the bed cabinet is in relation to the face panels and rails.
Page 10
Summary of Contents for Wallbeds
Page 2: ......
