10
USER
INSTRUCTIONS
Place the volcanic rock on top of the centre burner as shown. Ensure a 4-5 mm gap is le
between each piece. Then using
half
of the glowing ember wire supplied, ruffle between fingers
to make it loose, about 20mm wide and as long enough to cover the volcanic rock then align
over the rock as shown. Ensure no wire is placed within 25mm of the pilot assembly. Retain the
other half of the wire for replacement at annual service.
FUELBED
Place Log A in the orientaon shown ensuring it fits neatly into the locang features as shown below.
Place Log B onto the le raised burner as shown ensuring it fits securely.
