11
PHASE 3 AIRPRO TOUR – POLARIS & TSUNAMI*
C
C
D
E
F
G
B
A
B
Position seat back for lumbar support while paddling or upper back
support while relaxing, the Phase 3 AirPro backrest will conform to
you providing all day comfort.
Large comfort holes allow ventilation for air flow while providing
cushioning to hard contact areas under the legs and along the spine.
Smaller holes on the backrest provide ventilation and increased
support to the oblique muscles while the holes in the seat pad
support the sit bones and provide drainage for water.
The backrest is lowered by pulling the nylon strap loop with the
icon. Push the gray web cleat lever to release the strap and
raise the backrest.
The padded seat back adjusts forward and back with straps located
on either side of the paddler with the icon. These straps are
located above the thighbraces on touring models. Tighten the
backrest by pulling forward on the nylon strap or loosen it by pulling
on the black and silver finger pull loop. For good rotation while
paddling it should not be too tight.
The leg lifter height is adjusted with the gray handle and
corresponding gray web cleat release levers; to raise the height of
the leg lifter gently shift one’s weight off of the leglifter while pulling
the gray handle. To lower the leglifter press both gray web cleat
levers simultaneously.
The mesh bag located in front of the central controls can be used
to store the leg lifter handle, seat height adjustment strap, a water
bottle or any other items you would like to keep in easy reach.
A
C
D
E
F
G
B
PHASE 3
®
AIRPRO SEATING SYSTEM
*Available on Tsunami model sizes 120, 125, 135, 140 & 145
