Net
User Manual 7.1 (2019-04) 21
Subject to change
BS2-BZ-01 FACP module
The FACP module facilitates connection of on-site signalling units to Wildeboer-Net using four inputs for floating
contacts and two floating outputs. The module monitors cables connected to the inputs for faults. It can be used for
sequence controls, release group controls and calendar controls.
All actuations and functions can be remote-controlled or manually controlled using push buttons in the FACP
module.
•
Four inputs for floating contacts. Connections with plug-in screw terminals. Connected cables are monitored for
faults.
•
Two floating outputs (2 – 30 V DC / 10 µA – 2 A). Connections with plug-in screw terminals.
CAN
CAN
73
inputs
74
outputs
FACP module
BS2-BZ-01
3
4
2
2)
Remove the terminating resistor (3k3) when
using the interface.
Resistors:
•
R3 = 680R
•
R4 = 3K3
2)
1 2
2
3 4 5 6
werkseitige
Brücke
1
1 2
3 4 5 6
R1
R2
1 2 3
72
Sub-net-
work
Connection
Signal
1
CAN HIGH
2
CAN LOW
3
CAN shield
shielded 120
W
twisted pair cable,
1 x 2 x 0.34 mm², max
100 m between modules
1
3
2
Wildeboer-Net
Products (6)
Resistors:
•
R1, R2 = provided by the user
4
R
1
FACP module BS2-BZ-01
3
R
24 V DC
(SELV)
2
Detection device
2
2 – 30 V DC
(SELV)
2
R
1
R
3
Detection device
FACP module BS2-BZ-01
1
4
5
6
factory-pro-
duced bridges
2
3
Detection device
FACP module BS2-BZ-01
1
4
5
6
2 – 30 V DC
(SELV)
