EN
6
WIKA operating instructions, model CTR3000
14191761.01 05/2019 EN/DE
1. General information
■
The model CTR3000 described in the operating instructions has been designed and manufactured using state-of-the-art
technology. All components are subject to stringent quality and environmental criteria during production. Our management
systems are certified to ISO 9001 and ISO 14001.
■
These operating instructions contain important information on handling the instrument. Working safely requires that all
safety instructions and work instructions are observed.
■
Observe the relevant local accident prevention regulations and general safety regulations for the instrument’s range of use.
■
The operating instructions are part of the product and must be kept in the immediate vicinity of the instrument and
readily accessible to skilled personnel at any time. Pass the operating instructions onto the next operator or owner of the
instrument.
■
Skilled personnel must have carefully read and understood the operating instructions prior to beginning any work.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with international standards.
■
Further information:
- Internet address:
www.wika.de / www.wika.com
- Relevant data sheet:
CT 60.15
- Application consultant:
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
[email protected]
1.1 Abbreviations, definitions
3-wire
Two connection lines are used for the voltage supply.
One connection line is used for the measurement signal.
4-wire
Two connection lines are used for the voltage supply.
Two connection lines are used for the measurement signal.
(S)PRT/RTD
Resistance thermometer
TC
Thermocouple
■
Bullet
▶
Instruction
1. ... x
Following the instruction step by step
⇒
Result of an instruction
1. General information
