T6 Pro Hydronic
Programmable Thermostat
User Guide
Package Includes:
• T6 Pro Hydronic Programmable
Thermostat
• Floor sensor (model AQ12C20)
• UWP™ Mounting System
• Honeywell Standard Installation
Adapter (J-box adapter)
• Honeywell Decorative Cover Plate –
Small; size 4-49/64 in x 4-49/64 in x
11/32 in (121 mm x 121 mm x 9 mm)
• Screws and anchors
• 2 AA Batteries
• Installation Instructions and User
Guide
Call Honeywell Customer Care toll-free at
1-800-468-1502
.
Customer assistance
Thermostat controls
•
System status
information
Heat On/Recovery
•
Schedule information
Following time based
schedule
•
Actual time
•
Mode
Select system mode
Heat/Off
•
Menu
Press to display options.
Start here to set a
program schedule
•
Indoor temperature
setpoint
Press + or – to change
temperature setting
•
Actual indoor
temperature
•
Temperature/
Navigation buttons
Press to increase or
decrease temperature
setpoint and to
navigate menus and
menu options
The screen will wake up by pressing any of the five buttons. If powered by the C wire, the screen stays lit for 45 seconds
after you complete changes. If powered by battery only, the screen stays lit for 8 seconds. Depending on how your
thermostat was installed, the screen light may always be on.
