7
Press PROG once more: -A-appears, standing for "Low end of scale".
Press PROG once more: The "MIN" LED flashes and the corresponding
value is displayed. Change this value as desired by hitting the (
) and
(
) keys. Press PROG once more: The new value will be memorised.
This is indicated by 3 dashes "---" appearing for a few seconds.
The "MIN" LED extinguishes and -E-appears, standing for "High end of
scale". Press PROG once more: The "MAX" LED flashes and the
corresponding value is displayed. Change this value as desired by
hitting the (
) and (
) keys. Press PROG once more: The new value
will be memorised. This is indicated by 3 dashes "---" appearing for a
few seconds.
The "MAX" LED extinguishes and dP appears, standing for "Decimal
point". Change the decimal point as desired by hitting the (
) and (
)
keys. Press PROG once more: The new position of the decimal point will
be memorised. This is indicated by 3 dashes "---" appearing for a few
seconds after which InX appears, standing for "Signal input X", where
"X" stands for figures 1 to 3 as explained below.
Change this value as desired by hitting the (
) and (
) keys.
X = 1:
In1
= Input signal voltage 0 ... 10 V
X = 2:
In2
= Input signal current 0 ... 20 mA
X = 3:
In3
= Input signal current 4 ... 20 mA
Press PROG once more: The new value will be memorised.
Summary of Contents for A-RB-1
