Wigersma & Sikkema UNICOM 300, Installation And User Manual, Page: 27 / 42

Installation and user manual UNICOM 300 N531
DDN5006GHEN/04-2021/rev.B1 27
Counter values
Name Unit OBIS Security level Description
Counter value input 1 m
3
1:23.0.0 SW2 Counter value input 1
Counter value input 2 m
3
2:23.0.0 SW2 Counter value input 2
Counter value input 3 m
3
3:23.0.0 SW2 Counter value input 3 Encoder
Settings for inputs
Name Unit OBIS Security level Description
INP1DIV
pulse/m
3
1:0.7.2 SW2 Pulse ratio input 1
INP2DIV
pulse/m
3
2:0.7.2 SW2 Pulse ratio input 2
sswEnc
- C.93.40 Password 2a Encoder input activation
sswPin2
- C.93.41 Password 2a
Setting of input 2
Settings for warnings and alarms
Name Unit OBIS Security level Description
Alarm INP2 – INP1
m
3
C.92.9 Password 2a
Alarm for volume difference between
set channels by sswInpDiff '. If = 0,
the volume difference function is
disabled
sswInpDiff
- C.93.39 Password 2a
Channels for determining volume
difference
Settings for outputs
Name Unit OBIS Security level Description
OUT1_div
pulse/m
3
C.94.1 SW2 Pulse ratio output 1
OUT2_div
pulse/m
3
C.94.2 SW2 Pulse ratio output 2
SSW_ pulsout1
- C.93.2 Password 2a
Switch for pulse output 1
At the moment of the creation of an
Alarm1 an impulse of 0.1s is issued.
If the status bit is then active, a pulse
of 0.1 is issued every 5 minutes
SSW_ pulsout2
- C.93.3 Password 2a
Switch for pulse output 2 (see also
C.93.2)
SSW_Alarm
mask 1
- C.93.42 Password 2a
Bitmask for transmission error at
status registers 7.1, 7.2 and 7.3 at
alarm output
SSW_Alarm
mask 2
- C.93.43 Password 2a
Bitmask for transmission error at
status registers 7.1, 7.2 and 7.3 at
alarm output 2
Consumption Data
Name Unit OBIS Security level Description
UBatt
LOGGER mV C.90.6 Voltage of the UNICOM 300
Battery hour
counter
LOGGER h C.6.0 Number of hours in operation