Wigersma & Sikkema UNICOM 300, Installation And User Manual

Page: 26 / 42

Installation and user manual UNICOM 300 N531
DDN5006GHEN/04-2021/rev.B1 26
Other settings
Name Unit OBIS Security level Description
Device address C.90.1 Password 2a Device address for IEC 62056-21
communication protocol
EAN-code C.96.0 Password 2a Customer specific code for the meter
location
End of gas day h C.91.2 Password 2a Moment when UNICOM 300 ends the
day and logs in the monthly logger. If
the log interval is at 24h, logging takes
place in the interval logger and is also
used for FTP
Gas meter
Serial number - 7-1:0.2.14 Password 2a Serial number of the connected gas
meter. When an encoder telework is
used, the serial number is automatically
taken over. In this case, the setting
cannot be changed by the user
FLAG coding gas
meter
manufacturer - C.91.10 Password 2a FLAG coding from the manufacturer of
the gas meter (3 letters). When using
an encoder telework, the FLAG code is
automatically adopted. In this case, the
setting cannot be changed by the user
Gas meter year of
construction - C.91.11 Password 2a Construction year of the gas meter.
When an encoder telework is used, the
year of construction is automatically
adopted. In this case, the setting
cannot be changed by the user
Broadcast mode - C.93.15 Password 2a Response to a 1107 request. In "Off"
UNICOM 300 does not respond if there
is no device address in the request
(transparent modem)
With "On", there will be a response if
there is no device address in the
request (logger)
Setting interval
time interval
logger
0.8.5 Password 2a Interval time for the interval logger P.01
Number of days in FTP file:
5 min = 10 days
10 min = 10 days
15 min = 31 days
30 min = 31 days
60 min = 61 days
1 day = 61 days
Stock lock - C.93.30 Password 2a Activate or deactivate stock-lock or
datalogger functions. Is set to Unlocked
after a time-date synchronization
Security SW 5 - C.93.24 SW5
Switch for activating protection by
SW5. If value is On, then the
parameters with protection SW5 are
protected by means of switch SW5. If
value is Off, then the parameters are
either by SW5, or by PWD2