Wige CUNIMA MCU [2], Operation Instructions Manual

Page: 21 / 26

21
6.2 COMMANDS
Command Description Data Useful value
AGAIN_ Analog gain 0000=0dB
0001=3dB
0002=6dB
0003=9dB
0004=12dB
0005=15dB
0006=18dB
0007=21db
0008=24dB (do not
use) 0003
BLACK_ Adjust blacklevel
(global) 0000-01FF 0040
BLACKB Adjust blacklevel
(additional blue) 80FF-00FF
Bit(15)=1 => negative
sign 0000
BLACKG Adjust blacklevel
(additional green) 80FF-00FF
Bit(15)=1 => negative
sign 0000
BLACKR Adjust blacklevel
(additional red) 80FF-00FF
Bit(15)=1 => negative
sign 0000
CAMACK Acknowledge
from camera 0000=OK, no errors
0001=unknown cmd.
0002-FFFF=error
codes 0000
DEFECT Defective Pixel
Correction Config 00FF>reasonable
values 0100
DPC___ Defective Pixel
Correction on/off 0000=off
0001=on 0001
DETAIL Adjust detail filter 0000=off
0001-0032=filter
degree 0018
FPAUTO Enables the
Fixed Pattern
Noise correction 0000=off
0001=static fpn
correction
0002=dynamic fpn
correction Default:
0002
FWINFO Firmware
information
(FPGA) 0000 0064
GAMMA_ Gamma 0000=linear/off
0001=rec709
0002=user defined 0001
GAMMAB Gamma black 0000-0040=Black gain 0020
GAMMAW Gamma white 0000-0080=White gain 0020
GAMMAK Gamma knee 0000-0040=Knee point 0020
INTEGR Adjust integration
time 000A-0064 from 10% to
100% 0064
MODE__ Operation Mode 0000=Color Mode
0001=BW Mode
0002=RAW Mode
0003=reserved Default:
0000
READY_ Shows finished 0000=OKAY Tested, OK