5
| Router Design
Wieland Electric GmbH | BA001037 (Rev. A) | 08/2016
19
5.9
Interfaces description
Besides the basic version of
wienet
WR-LAN v3 SL router there are available versions with the SWITCH
interface
5.9.1
SWITCH interface
Three LAN ports of the SWITCH interface intended for v3 routers (RJ-45 connectors for connecting ether-
net devices) act as typical network switch. This means that router with internal switch desk read ethernet
frames (data packets on an ethernet link) from any port and transmit them on every port of the switch
board. Each port on the switch can transmit frames independently on every other port.
State indication is provided on every connector. Router in this version complies with the standards and
temperature ranges declared in Chap. 7.1 except for the lower maximum operating temperature which is
+70 °C.
Version with SWITCH board
State indication of the port:
Description of indication
Green LED
On
Off
Selected 100 Mbit/s
Selected 10 Mbit/s
Yellow LED
On
Blinking
Off
The network cable is connected
Data transmission
The network cable is not connected
State indication of the port:
Ethernet interface, IEEE 802.3 standard
Maximum data rate
100 Mbit/s
Max. total cable length (300 Bd, 200 nF/km)
100 m
Summary of Contents for 83.041.0869.1
Page 26: ......
