5
| Router Design
10
Wieland Electric GmbH | BA001037 (Rev. A) | 08/2016
5.3
Ordering codes
Ordering codes overview is shown in the table below.
Name
Order code
Features – interfaces
WR-LAN v3 SL 5-Port
83.041.0809.1 5x ETH, 1x USB, 2x BI, 1x BO, 1x microSD reader
WR-LAN v3 SL 5-Port WIFI 83.041.0869.1 5x ETH, 1x USB, 2x BI, 1x BO, 1x microSD reader, WiFi
5.4
Basic dimensions of router box
5.5
Mounting recommendations
Possibility to be put on a work surface,
DIN rail EN 60715 with included clip.
For the most of applications with a built-in router in a switch board it is possible to recognize
two kinds of environments:
1.
no public and industry environment of low voltage with high interference,
2.
public environment of low voltage without high interference.
For both of these environments it is possible to mount the router to a switch board if the common EMC-
rules according to EN 60439-1 ed.2:00 + A1:04.
Note!
Compliance of EN 60439-1 ed.2:00 + A1:04 specification it is necessary to observe next assembly of the
router to the switch – board:
For several cables we recommend to bind the bunch. We recommend for this use:
–
The Length of the bunch (combination of power supply and data cables) can be a maximum of 1.5
m. If the length of data cables exceeds 1.5 m or if the cables are lead outside the switch – board,
we recommend installing over – voltage protectors (surge suppressors).
–
Between data cables and cables with reticular tension of ~ 230 V / 50 Hz sufficient space (min.
50 mm) should be kept.
–
A certain space must be kept before the cables for connecting or disconnecting singular cables.
For correct function of the router we recommend to use it in a switch-board with earth-bonding distribu-
tion frame for grounding of the power supply, of the router, the data cables and the antenna.
NOTE
Summary of Contents for 83.041.0869.1
Page 26: ......
