THE PARKING BRAKE
The stroller features a parking brake, locking
both wheels. To engage a parking brake, push
the pedal down with your foot. A parking brake
release follows by picking its bar up (fig. 12).
Warning: Never leave the stroller with a child
on the ramp surface, even if the brake is en-
gaged.
Warning: Never use the stroller with a parking
brake engaged.
AMORTIZATION
The stroller features a spring amortization,
which the hardness can be adjusted using a
special switch (fig. 13).
THE PUMPED WHEELS
The stroller is available with the pumped
wheels. The maximum allowed wheel pres-
sure is 0,5 bar.
MOUNTING AND DISMOUNTING
THE CARRYCOT
Warning: Before use the stroller, make sure
the carrycot is correctly mounted and locked
on both sides of the stroller.
Warning: Do not unfold the frame, when the
carrycot is mounted.
The carrycot can be mounted forward facing
or parent facing.
To mount the carrycot on the frame, slide into
the assembly sockets on the both sides of the
frame, until it clicks into place.
THE CARRYCOT ADJUSTMENT
The mechanism of the carrycot adjustment is
located under the carrycot, from the side of
the canopy. To lift up the backrest, turn the
mechanism left, to pull down, turn the mech-
anism right (fig. 15a).
The mechanism of the carrycot adjustment
is located under the mattress. To lift up the
backrest, pull up the mechanism and set in
the desired position. To pull down the back-
rest, pull up and hold the handle and set the
desired position (fig. 15b).
THE CARRYCOT HOOD
The carrycot features a permanently mounted
hood. To change its position, press the buttons
on the both sides of the hood at the same time
and choose the appropriate angle (fig. 16).
The hood is mounted to the top of the carrycot
with the zipper.
The hood features the holder to move the car-
rycot and rain canopy folded inside.
THE CARRYCOT COVER
The carrycot features a cover, which is mount-
ed by pinning snaps to snaps located on the
both sides of the hood (fig. 18)
MOUNTING AND DISMOUNTING THE SEAT
Warning: Before use the stroller, make sure
that the seat is correctly mounted and locked
on the both sides of the stroller.
Warning: Do not unfold the frame, when the
seat is mounted.
The seat can be mounted on the frame forward
facing or parent facing.
To mount the seat on the frame, plug the
mounting brackets into sockets on the both
sides of the stroller (19a). It locks automati-
cally.
To dismount the seat, hold the mounting brack-
ets on the both sides of the stroller, press the
oblong buttons located there, and holding, pull
the seat up (19b).
THE BACKREST ADJUSTMENT
The backrest is regulated in 4 positions. Raising
up by lifting up to the desired position (fig. 22).
To pull down, pull the hand from the back of
the seat and set the desired position (fig. 23).
Warning: During the backrest adjustment pay
attention to child’s hands and head.
THE CANOPY
The seat features the removable canopy. To
mount the canopy, slide the brackets into the
designated holders on the both sides of the
seat (fig. 24).
To dismount the canopy, press the brackets on
the both sides of the seat and pull out from the
sockets (fig. 25).
