Wiedenmann Terra Clean 100, Translation Of Original Operating Instructions

Page: 41 / 51

Terra Clean 100
11 Maintenance
10 | 2020 239 99 01 – 003 41
ATTENTION!
➢
Only original parts should be used!
Parts from other manufacturers are often not of sufficient quality and so endanger your safety.
In addition, the warranty and claims against warranty can only be guaranteed if only original parts by
Wiedenmann were used. We explicitly inform you that parts not delivered by Wiedenmann are not tested or
released by Wiedenmann. Therefore, installing or using such products may negatively influence preset
properties of your vehicle and therefore endanger your active or passive safety. Damage caused by the use
of parts other than original parts are excluded from the manufacturer’s liability
11.2. Maintenance tables
11.2.1. Maintenance table (staggered in time)
Maintenance interval Maintenance measure Area
First use after 5 hours
➢
Check all moving parts and screws for
tightness.
Machine
Every 8 hours
➢
Basic cleaning
Screen
➢ Clean
Sweeping roller
➢
Check the wheels and tyres for under-
inflation, cuts and protrusions.
➢ Check and replace, if necessary, wheel bolts
and wheel nuts, as well as rims.
Wheels and tyres
First use after 20 hours
➢ Initial check
See section 11.5.1
Chain tension
20 hours
➢ Lubricate; with chain grease or adhesive
lubricant
Chain
40 hours
➢
Check and retension, if necessary, chain
tension
See section 11.5.1
Chain
As required
➢ Check air pressure
Wheels
➢
If brush length is (shorter than 65 mm) install
new brush strip set
See section 11.4.2
“
Strip brushes
Annually
➢ Protect the machine
Machine