Flex Cut RMR 230 H
10 Maintenance
05 | 2021
846 99 01
–
003
41
Maintenance interval
Maintenance measure
Area
Every 500 hours
➢
Change gear lubricant oil
see chapter 10.5.1
Gearbox
➢
Sharpen mowing blades.
See Info!
Mowing blades
➢
Clean the mower thoroughly at the end of
each mowing season and conserve it using
spray oil.
➢
Before starting a new task, check all the
areas that were previously worked on.
Mower unit
INFO!
➢
From machine ID no. 846 KD 1001, the machines are supplied with DURA BLADE blades as standard. In
accordance with the manufacturer's information, these blades must
NOT
be ground on the rear side, as too
much heat gets into the coating of the blade edge due to grinding, and there is consequently an increased risk of
breakage.
10.3
Lubricating points
10.3.1
Lubricating greases
Designation
Capacity
Specifications
Lubricating greases (Blade bearing)
ca. 0,3 l
Lithium soap NLGI 2
Temperature range -30 to 140 °C
10.3.2
Blade bearing
Every 250 hours:
➢
Lubricate the lubrication nipples (
1
–
3
) on the top of
the blade bearings.
