Flex Cut RMR 230 H
10 Maintenance
44
846 99 01 - 003
05 | 2021
10.4.3
Swinging mower back to working position
After work has finished, the lawn mower must be set up for
deployment as follows
➢
Before the frame is lowered, all protective equipment
must be reinstalled.
➢
Remove the security latch (
1
).
➢
Lower the frame until the limit plate (
2
) can be
inserted in the front slotted hole (
3
).
➢
Secure the security latch (
1
) and limit plate (
2
) with a
linch pin (
4
).
10.4.4
Attaching boundary struts
On both sides:
➢
Attach boundary struts (
1
) to the bolt (
2
).
➢
Fit discs (
3
) on the bolt (
2
) and secure with the linch
pin (
4
).
➢
Fit the cardan shaft.
10.5
Gearbox
10.5.1
Change of gear lubricant oil
Removing right mower covers
➢
Undo four hexagon screws (
1
) and remove the top
cover (
2
).
➢
Undo four hexagon screws (
1
) and remove the bottom
cover (
2
).
