Kunststoffschweißtechnik
Description of Product
Chapter 1
14.04.14 Working
Instructions
WIDOS MINIPLAST 2
Page 7 of 42
1.3. Safety measures
In case of wrong use, wrong operation or wrong maintenance, the machine itself or products
standing nearby can be damaged or destroyed.
Persons being in the endangered area may be injured.
Therefore these working instructions have to be thouroughly read and the corresponding
safety regulations must be necessarily adhered to.
1.4. Conformity
The machine corresponds in its construction to the valid recommendations of the European
Community as well as to the according European standard specifications.
The development, manufacturing and mounting of the machine were made very carefully.
1.5. Designation of the product
The product is designated by a sign at the basic frame.
It contains the type of the machine, the serial number and the year of construction.
1.5.1 Technical data
1.5.1.1 WIDOS
MINIPLAST
2
General Data
Material:
PP, PE-HD, PVDF, PE 100
Pipe diameter range:
Outside
= 20 - 110 mm
Sheet steel carrying case (lxwxh):
450 x 300 x 365 mm
Weight (without packing):
30 kg
Fuse: 10
A
Wire cross section:
1.5 mm²
Emissions:
- Noises exceeding 80 dB (A) may occur; during
planing it is obligatory to wear ear protection!
- When using the named pipe materials and
when welding below 260 °C no toxicant damp
arises.
Ambient conditions in the welding area:
- Keep the workshop clean (no dust at the
welding area)
- If secured by an appropriate measurement that
allowed conditions for welding are indicated, it
is possible to work in any outside temperature
condition as far as the welder is not
constrained in its manual skill.
- Avoid humidity, if necessary use a welding tent
- Avoid strong sun rays influence
- Protect from wind, shut the pipe ends
