Kunststoffschweißtechnik
Operating and indicating elements
Chapter 4
26/04/11
Working Instructions WIDOS HRG 10, Segment
Page 17 of 49
4.3 Planer
No.
Name
Function
17
Safety bolt
- Is axially secured by means of a grub screw. For
removing the safety bolt, turn it until the lever shows
almost vertically upwards, then remove it.
18
Movable supporting fork
- For inserting / lifting-off the planer. After removing the
safety bolt, the supporting fork moves into direction of
the arrow.
19
Supporting bolt
- Insert the planer with the supporting bolts in the
locking forks of the clamping rings / reception box.
20
Vent screw
-
Attention!
Never put the planer on its side, there is
the risk of oil slick at the vent screw.
21
Switch on/off
- The on/off switch of the planer
22
Connnecting cable with
plug CEE-16A
- Connect with socket 400 V / 16 A on hydraulic
aggregat
23
Screw for chain tightening
- Release the screw and move it in the slot for
tightening or releasing the planer chain. Tighten
again firmly the screw.
Remove the safety bolt only during inserting the planer into the basic
machine or taking out of the basic machine!
18
17
19
23
22
21
20
