Description of product
Chapter 1
06.05.2019
Working Instructions WIDOS 2500 / OD 315 with T-90°
Page 7 of 35
1.4.1.
Technical data
1.4.1.1.
WIDOS 2500 / OD 315 General data
Dimensions of pipes:
outside-Ø = 50 - 315 mm
Material:
PP, PE 80, PVDF, PE 100
Fuse protection:
16 A
Wire cross section:
1.5 mm²
Emissions
- Noise exceeding 80 dB (A) may occur; during planing it is obligatory
to wear ear protection!
- When using the named plastic materials and when welding below
260° C no toxicant damp arises.
Ambient conditions in the
welding area
-
take care for cleanness (no dust at the welding area)
-
do not weld below 5°C, if necessary preheat
-
avoid humidity, if necessary use a welding tent
-
avoid strong sun rays influence
- protect from wind, shut the pipe ends
1.4.1.2.
Heating element
Power:
2100 Watt
2100 Watt
Current:
9.1 A (± 10 %)
19,1 A
Voltage:
230 V (± 10 %)
110 V
Frequency:
50 Hz
60 Hz
Surface: nonstick
coated
Attached elements:
- electronic temperature control
- control lamp
- connecting cable with plug
1.4.1.3.
Planer
Power:
1150 Watt
1150 Watt
Current:
4.6 A (± 10 %)
9,5 A
Voltage:
230 V (± 10 %)
110 V
Frequency:
50 Hz
60 Hz
Attached elements:
- connecting cable with plug
1.4.2.
Equipment and accessories
The following tools and accessories are part of the first delivery:
1
Tool bag for 10 parts
1
Hexagonal socket screw key size 5 with T-grip for mounting / dismounting the
reduction inserts
1
Hexagonal socket screw key size 10
1 each
Fork wrench size 13 / 19
1
Screw driver with Torx-drive T10
See spare parts list for order numbers and single parts. In case of an order please always give the
machine number!
