Operating
and
indicating
elements
Chapter 4
06.05.19
Working Instructions WIDOS 2500 / OD 315 with T-90°
Page 15 of 35
4.4.
Elements to weld bends / fittings
For welding arcs / moldings are several holes on the machine slide, and an engraved scale. The angles
have three holes and an elongated hole.
Top view of left table:
When welding straight pipes, the pieces
with the following bore holes are screwed
together:
Table 1 with angle 6
Table 2 with angle 7
When welding bends 0 – 7,5°, the following
bore holes are screwed:
Table 5 with angle 8
Table 3 with angle 9
When welding bends 7,5 – 15°, the following
bore holes are screwed:
Table 4 with angle 8
Table 3 with angle 9
View onto left angle:
The desired angle can be read at the reading
edge.
Reading edge for
scale
