6
19.
Pebble effect setup:
Remove the pebbles carefully from the packaging
and place the pebbles evenly on the effect tray. The
fire is supplied with a pebble effect light box that is
positioned on top of the flame effect panel as shown
in the diagram (right).
20.
Moulded Log effect setup:
Fit as shown in the diagram (right).
In this case the pebble effect light
box is not used.
21. Fit the Facia
see below:
FITTING THE FASCIA:
The fire front may now be fitted to the fire chassis as follows.
At the rear of the facia frame there is a large v shaped hook. Hook this over
the fixing lip located on the fire back.
Carefully lower the bottom edge of the facia frame towards the fire chassis
until the magnets connect the facia frame to the fire chassis.
Place pebbles onto the bed
Bed
HOOK OVER
CLIP TO
MAGNET
FIRE FRONT FITTING
Fit the Log fuel
bed moulding as
shown by
arrows, making
sure that it
covers the
bottom of the
effect screen
and rests on the
illumination box.
