16
17
Removing Bravo
First remove the hearing aid from its position be-
hind the ear . Carefully pull the earmould out of
the ear canal, while holding the lower part of the
tubing . If it is difficult, it may help to try to move
the earmould carefully from side to side while
pulling it out . It may also help to pull the outer
ear upwards and backwards with the opposite
hand .
In case of malfunction
Should your hearing aid be completely or periodi-
cally dead, try the following before consulting
your hearing healthcare professional:
• Make sure the hearing aid is switched on .
• Disconnect the tubing with earmould from
the hook of the hearing aid and check if
there is moisture in the tubing or earmould .
• Check that the earmould is not blocked by
earwax . Disconnect the tubing with ear-
mould from the hook of the hearing aid and
try to blow air through the earmould with a
small blower .
• Change the battery and make sure the new
battery is correctly inserted .
See the Troubleshooting guide p . 30-31 .