8
9
Telecoil (M-T-MT button)
Switch to “T”: Your hearing
aid is equipped with a telecoil .
You can activate it by pressing
the button briefly
once
(for ap-
proximately 1 second) . Bravo
will signal the change by mak-
ing
one
brief beep-tone .
Switch back to “M”: If you wish to listen via the
microphone again (
normal use
), press the button
briefly
again . Bravo will signal the change by
making
one
brief beep-tone .
The telecoil can be used within any magnetic field
or loop system without background interference .
A loop system or magnetic field device can be fit-
ted to a TV or radio . Some public places such as
churches, theatres, cinemas and lecture rooms
are already equipped with a loop system .
Ask your hearing healthcare professional for
more information .
Listening via the telecoil “T” can be useful e .g .
when telephoning . But on some telephones, the
magnetic field is inadequate, in which case the
“M” position should be used . If you are not sure
your phone is hearing aid compatible, consult
your hearing healthcare professional .
Switch to “MT”: If you activate “MT” (micro-
phone/telecoil) on your hearing aid, you can listen
via the telecoil while still hearing the sounds in
your surroundings (e .g . when watching TV while
still wanting to hear the doorbell or other
sounds) .
To switch from “M” (microphone) or from “T” (tel-
ecoil) to “MT” (microphone/telecoil) give the but-
ton a
long
press (for approx . 3 seconds) . Two brief
beep-tones indicate the change to “MT” position .
Back to “M”: To revert to the “M” (microphone)
position, press the button (a short or long press)
once .
If you are not sure which program your hearing
aid is in, you can turn the hearing aid off and on
again . The hearing aid will always start up in the
“M” position, that is with the microphone on (nor-
mal use) .
