ezWAVE Cards Users’ Guide
Version 1.6
Copyright© Widelink 2000
DOC – 2001.02.01
Page 23 of 36
Throughput (Byte/sec)
shows transmission/receiving data rate.
Link Quality
shows measured radio link quality. If the link quality is bad, your computer
may not communicate with other client computers. Otherwise (fair/good/excellent),
there will be no problems in communicating with other clients.
Signal Strength
is almost similar to Link Quality information except for a slight
difference.
Usually, the quality level moves simultaneous with the Link Quality level.
Mode
: You can select wireless LAN network mode – Infrastructure or Ad-hoc mode
Infrastructure Mode
This mode is used to set up a connection to a wired Ethernet network. This mode
requires an ezWAVE Access Point to gain access to the wired network.
Ad Hoc Mode
This mode is used to set up a small, temporary network between two or more
computers. For example, you might set up an ad hoc network between computers in a
conference room so users can share information in a meeting.
Network Configuration
Network Configuration
Network Configuration
Network Configuration
