6
Operation
Starting the car camcorder
Turning ON/OFF
Press
power button once to power on. The light indicator will turn on.
Press
again to power off. The light indicator will turn off.
Attention: Low battery is displayed before shutting down.
Charging Batteries
There 3 ways of charging the battery:
1. Using an AC adaptor to charge battery
2. Using USB to charge battery
3. In-car battery charging
LED Indicators
Red LED: Power
On: Camera is powered on
Off: Camera is powered off
Blue LED: Charge
On: Camera is charging
Off: Camera has finished charging
Note: If the camera is charging and powered on, both lights will be lit.
Installing the Micro SD card
Insert the micro SD card into the memory card slot according to the image below; press it until you hear a click.
Removing micro SD card: Press it once and remove it after it pops up
Basic operation
With the micro SD card installed and the camera connected to the in-car charger, simply turn on the car and the
camera should turn on and start recording. A magenta light will signify the camera is on and plugged in. The screen
should turn on as well, show the current scene, and a blinking red dot to signify it is recording. When the car is
turned off, the camera will stop recording and shut down.
Note: If your car’s charging port remains powered after the car has been turned off, the camera will have to be
turned on and off by manually by pressing the power button. The recording can be started and stopped by pressing
the REC button.
How to switch between video, photos, playback modes
Press MODE to cycle between modes
How to enter the system Setup menu
Press MENU once then press MENU key again in any mode to enter the Setup menu.
Date setup: Sets the Date & Time
Auto Power Off: If no action is taken and the camera is not recording for the selected amount of time, the
