7
camera will turn off. The OFF option means the screen will always remain on. [OFF, 3mins, 5mins, 10mins]
Beep Sound: Controls the sounds when buttons on the camera are pressed. [OFF/ON]
Language setting: Changes the language on the camera. [English, Traditional Chinese, Simplified Chinese,
Japanese, Russian, German, French, Spanish, Italian, Portuguese]
TV Mode: When outputting to a TV, please select the appropriate setting for your country. [NTSC/PAL]
Frequency: Depending the lighting, flickering may occur. Change this setting to compensate. [50Hz/60Hz]
Screen Protection: Automatically turns off the screen after the selected amount of time. [Off, 3mins, 5mins,
10mins]
IR LED: Controls the light to assist in dark environments. [OFF/ON]
Format: Formats Micro SD card (this action will delete not locked data stored on the Micro SD card)
Default Settings: Reset the camera to default settings [Cancel/Proceed]
Version: Displays the version number of the camera.
How to record video and enter setup
◣
Shooting video
Press REC to start recording. Press it again to stop.
In recording mode, press MODE key to activate Day/Night mode
◣
Video option settings:
Press MENU key while in video mode and enter the video option setting
Note: The video settings menu is not accessible while the camera is recording.
Resolution: Change the resolution of the video being recorded. [1080HFD 1920x1080, 720P
1280x720@60FPS, 720P 1280x720@30FPS, WVGA 800x480, VGA 640x480]
Loop Recording: Determines the length video recordings should be divided into. If it is set to off, the camera
will stop recording once the Micro SD card is full. Otherwise, once the card is full, the oldest recordings are
overwritten. [Off/3min/5min/10min]
WDR: Wide Dynamic Range enables both light and dark parts of a scene to visible simultaneously. [OFF/ON]
Exposure: Changes the exposure of the recording [+2.0, +5/3, +4/3, +1.0, +2/3, +1/3, 0.0, -1/3, -2/3, -1.0, -4/3,
-5/3, -2.0]
Motion detect: Once motion is detected, the camera will automatically start recording. After 10 seconds of no
movement, the camera will automatically stop recording. [OFF/ON]
Record Audio: Controls if audio is recorded. [OFF/ON]
G-sensor: When the impact dynamics reach the value you setup, the video will be locked. [OFF/ON]
Date Stamp: Determines if the date is recorded directly onto the video. [OFF/ON]
How to enter photo setting options
◣
Taking photo
Press REC key to take a photo
◣
Photo shooting setup options:
Press MENU key while in photo mode and enter the photo shooting setup option
Capture Mode: Determines whether to take a regular photo or to have it on a timer. [Single, 2sec timer, 5sec
timer, 10sec timer]
Image resolution: Change the resolution of the photo. [VGA 640x480, 1.3M 1280x960, 12M 4032x3024, 10M
3648x2736, 8M 3264x2448, 5M 2592x1944, 3M 2048x1536, 2MHD 1920x1080]
Sequence: Takes 3 pictures one right after the other. [OFF/ON]
