MicroGuard-USB Instructions: GSM Remote for Parking Heaters
1. Introduction
The purpose of this manual is to provide general instructions for installation
of our MicroGuard-USB devices into cars equipped with parking heaters
and to explain parameter settings necessary for operation with different
heater manufacturers and models. Dedicated manuals for different heaters
are available in German language on our website:
http://microguard.de/downloads/anleitungen-microguard-usb
Please use those manuals for the individual connection of our device to a
particular heater model.
2. Scope of delivery
In the delivery you will find the following content:
•
MicroGuard-USB (control device),
- special version with power conversion 12V or
- a special version with modification for your specific connection
•
Connectors with 15cm cable (will need individual extension)
•
Option: external temperature sensor(s), if ordered
•
Option: y-cable for several temperature sensors (if ordered)
For GSM remotes we offer only external temperature sensors.
3. General switching function
MicroGuard-USB is equipped with two output and two input lines which can
be used for heater switching and switch control (or alarm lines).
•
Older heaters can be controlled using +12V signals (orange
output) or ground output (brown).
•
Newer heaters use Bus signals (W-Bus, LIN, CAN). We offer a
special modul equipped with W-BUS signals. In other cases we
adopt the connection of our module to an existing control device
(like timer or wireless receiver).
http://www.microguard.de
V1.0 Seite 3
Summary of Contents for MicroGuard-USB
Page 1: ......
