Weldmatic 396
Model No CP126-2, Iss A 05/09
7
Fig 1
Power Source Controls
1 Ammeter
This meter displays actual welding current
during welding operation, and a stored
reading for 30 seconds after welding.
2 Voltmeter
This meter displays actual welding voltage
during welding operation, and a stored
reading for 30 seconds after welding.
3 Wirefeeder Control Socket
Connector for control cable from remote
wirefeeder.
4 Circuit Breaker
This circuit breaker protects the 30 Vac
wirefeeder supply circuit.
4 Power Source Controls
2
5
1
5 Coarse Voltage, On/Off Control
This switch provides mains power ON/
OFF and Coarse adjustment of the output
welding voltage over three ranges.
6 Fine Voltage Control
This switch provides Fine adjustment of the
output welding voltage over ten steps.
7 Gas Outlet
Connector for shielding gas hose from
remote wirefeeder.
8 Negative Welding Output Terminal
9 Positive Welding Output Terminal
6
7
8
9
3
4
