![background image](http://html1.mh-extra.com/html/whyte/wm508/wm508_instruction-manual_978525005.webp)
CONNECTING THE SUBSCRIBER CABLES
Terminate the Subscriber Cables with good quality F Connectors and
connect to the Subscriber Outputs. The F Connectors should be fitted to
the coaxial cable correctly, ensuring that the centre core protrudes 3mm
above the F Connector body. See figure 3. Ensure that you do not exceed
the bending radius of the Coaxial Cable being used. The Subscriber Cables
may be arranged either side of the Multiswitch before being terminated and
connected. If required, the Subscriber Cables may be arranged to one side of
the Multiswitch, with the cables passing under the Multiswitch before being
terminated and connected to the Subscriber Outputs on the opposite side.
See figure 4.
Earth Bonding
Earth bond the Multiswitch to the Earth Bonding Lug and/or the Earth
Terminal Bars using minimum 4mm² Earth Bonding Cable. It is best practise to
earth bond across the Earth Bars of all components within a single IRS System
using a single unbroken Earth Bonding Wire. To achieve this, strip away 3cm
of the insulation of a length of 4mm² Earth Bonding Wire. See Figure 1.
Unscrew the Earth Bolt on the Earth Terminal Bar to provide enough clearance
to wrap the Earth Bonding Wire around the Earth Bolt. See Figure 2. Tighten
the Earth Bolt and route the Earth Bonding Wire to all other Earth Terminal
Bars and terminate as detailed above. Make sure that the Earth Bonding Cable
is connected directly to the building’s PME.
Figure 1
Figure 2
3mm
Figure 3
Figure 4
ON
OFF
DC
12V
4G
5G
Multiswitch WM516
Freq Range TERR
Freq Range SAT
Gain TERR
Gain SAT
Max Output TERR
Max Output SAT
Current Consumption
47~790 MHz
950~2150 MHz
9dB
10dB
85dB
µV
100dB
µV
210mA Max
Whyte
REC6
REC2
REC4
REC8
REC10
REC12
REC14
REC16
REC5
REC1
REC3
REC7
REC9
REC11
REC13
REC15
+DC
+DC
DC IN 18V
DC OUT 18V
AUXILIARY
8
9