Whyte G-150 S SCR, Supplementary Service Manual

Page: 8 / 44

Page 8
2015 Edition 1
WHYTE Service Manual
3.0: PREPARATIONS FOR RIDING
3.1: MAKING ADJUSTMENTS
Please refer to the specific component manufac-
turers manual or published technical information
about adjusting the components on your Whyte
bike. Instructions may be downloaded from the
relevant manufacturer’s internet site, as shown
in the table to the right.
CAUTION! If you are uncertain in any
way, about making adjustments to any
components on you Whyte bike, then
DO
NOT RIDE YOUR BIKE
.
Contact your Whyte dealer who will be able to
advise you on how to go about setting up you
Whyte bike for riding, and or making adjust-
ments to the components fitted to your Whyte
bike.
DT Swiss www.dtswiss.com
Easton www.eastonbike.com
Ergon www.ergon-bike.com
Fi:zik
www.fizik.it
Fox www.foxracingshox.com
Jagwire www.jagwireusa.com
Maxxis www.maxxis.com
Prologo www.prologotouch.com
Race Face www.raceface.com
Shimano
www.shimano.com
SR Suntour www.srsuntour-cycling.com
SRAM www.sram.com
WTB
www.wtb.com
X-Fusion www.xfusionshox.com
FSA www.fullspeedahead.com
Frame Size X Small Medium Large Extra—Large
Head Angle A
69.5° 69.5° 69.5° 69.5°
Seat Angle B 74.2° 74.0° 73.8° 73.7°
Top Tube C 578.9mm 598.9mm 613.7mm 628.7mm
BB Height* D 335mm 335mm 335mm 335mm
Stand Over E 795mm 797mm 801mm 805mm
Wheel Base F
1105.3mm 1125.3mm 1140.3mm 1155.3mm
Chain Stay G 431.4mm 431.4mm 431.4mm 431.4mm
Seat Post H
30.9mm 30.9mm 30.9mm 30.9mm
2.5: Whyte M-109C Geometry
Notes:
Geometry shown here is ‘Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at front and rear. Please refer to suspension set up for information on how to achieve the correct sag of the
fork and rear damper.
* Effective seat angle, from wheel centres horizontal to line from BB to seat post axis @ top of saddle.
** BB height with Ø748mm tyres fitted (29” x 2.25” / 54/56-622)