Page 38
2015 Edition 1
WHYTE Service Manual
7.1.3: Rear Derailleur Adjustment
Reference figure 26. With the chain sitting on the smallest front chain-ring and also on the
smallest rear cassette sprocket, make sure that there is at least 5mm clearance between the
rear derailleur and the swinging arm chain-stay pivot. To adjust this clearance, using a flat
blade screwdriver, turn the B-screw as indicated in the inset view in figure 26. Turn it clock-
wise to increase clearance.
8.0: WHYTE INTER GRIP SEAT CLAMP SERVICE
Tools Required:
5mm AF Allen Keys (2 off, 1 fitted to a 3Nm to 15Nm Torque Wrench)
M6 cap-screw at least 40mm long or a small size flat blade screwdriver
SKF LGEP2 or Castrol Spheerol AP3 or Finish Line Teflon White Lithium
Complex grease
Reference figures 27 to 49. To service the Inter Grip seat clamp, carefully follow these proce-
dures otherwise there is a risk of damaging some of the components.
Especially remove
5mm minimum clearance
Figure 26: Rear Derailleur Adjustment
B-screw location
Rear Derailleur
Summary of Contents for G-150 S SCR
Page 2: ......
Page 5: ...Page 5 2015 Edition 1 WHYTE Service Manual 2 0 GEOMETRY Figure1 Geometry...
Page 44: ......
