background image

17 

 

 

 
 
 

To obtain service or information, contact 

Whynter via email at 

[email protected]

 or call  

866-WHYNTER.

 

 

 

 Product contents and specifications may change without notice.  

Copyright © 2013 Whynter LLC 

www.Whynter.com

 

 

ONE YEAR LIMITED WARRANTY  

 

This WHYNTER Ice maker is warranted, to the original owner within the 48 continental states, for one 
year from the date of purchase against defects in material  and workmanship under normal use and 
service. Should your ice maker prove defective within one year from the date of purchase, return the 
defective part or unit, freight prepaid (within two months of purchase; after two months to one  year, 
customer  will  be 

responsible  for  freight  cost  to  Whynter’s  service  department),  along  with  an 

explanation  of  the  claim  to  Whynter  LLC.  Please  package  the  ice  maker  carefully  in  its  original 
packaging material to avoid damage in transit. Please retain the original box and packaging material. 
Under  this  warranty,  Whynter  will  repair  or  replace  any  parts  found  defective.  This  warranty  is  not 
transferable. After the expiration of the warranty, the cost of labor and parts will be the responsibility of 
the original owner of the unit.  

 
THIS WARRANTY DOES NOT COVER: 

 

Acts of God, such as fire, flood, hurricanes, earthquakes and tornadoes. 

 

Damage, accidental or otherwise, to the ice maker while in the possession of a consumer not 
caused by a defect in material or workmanship; 

 

Damage caused by consumer misuse, tampering, or failure to follow the care and special 
handling provisions in the instructions. 

 

Damage to the finish of the case, or other appearance parts caused by wear. 

 

Damage caused by repairs or alterations to the product by anyone other than authorized by the 
manufacturer. 

 

Freight and Insurance cost for the warranty service. 

 

      DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES 

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE 
PRODUCT  REPAIR  OR  REPLACEMENT  AS  PROVIDED  HEREIN.  CLAIMS  BASED  ON  IMPLIED 
WARRANTIES,  INCLUDING  WARRANTIES  OF  MERCHANTABILITY  OR  FITNESS  FOR  A 
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED 
BY  LAW,  BUT  NOT  LESS  THAN  ONE  YEAR.  WHYNTER  SHALL  NOT  BE  LIABLE  FOR 
CONSEQUENTIAL  OR  INCIDENTAL  DAMAGES  SUCH  AS  PROPERTY  DAMAGE  AND 
INCIDENTAL  EXPENSES  RESULTING  FROM  ANY  BREACH  OF  THIS  WRITTEN  LIMITED 
WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW 
THE  EXCLUSION  OR  LIMITATION  OF  INCIDENTAL  OR  CONSE-  QUENTIAL  DAMAGES,  OR 
LIMITATIONS  ON  THE  DURATION  OF  IMPLIED  WARRANTIES,  SO  THESE  LIMITATIONS  OR 
EXCLUSIONS  MAY  NOT  APPLY  TO  YOU.  THIS  WRITTEN  WARRANTY  GIVES  YOU  SPECIFIC 
LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. 

 

Summary of Contents for UIM-501SS


















Reviews: