background image

LCD DISPLAY OVERVIEW 

4  5.a 

10 

11 

5.b  5.c 

1. 

TIMER INDICATOR 

Displays remaining time when unit to turn ON or 
OFF. (see Timer Setting Instructions on page 8) 

2. 

ICE SIZE INDICATOR

 

This unit produces bullet-shaped ice. Each time you 
press the ice size selector button, the size selection 
window will change between Small and Large. The 
chosen size shall stay as selected unless changed 
or there is a power failure. When ambient tempera-
ture is below 59ºF, the most efficient operation is to 
use the small cube size setting. In an event of a 
power interruption, operation does not restart auto-
matically. Upon restart, Large ice size will be select-
ed at default. 

3. 

ICE DISPENSING INDICATOR 

This indicator is displayed when the unit is dispens-
ing ice.  

4. 

ON/OFF INDICATOR

 

This indicator is displayed all the time to show that 
the unit is plugged in and receiving power. 

5. 

OPERATION INDICATORS

 

 

5.a    

ICE FULL INDICATOR 

When the ice bin is full, this indicator will be dis-
played. The indicator will remain until the ice in the 
bin either melts away slowly or has been removed. 
The unit will stay in a “Standby” mode until the ice 
has been removed / melted at which time the unit 
will automatically start operation as normal. 
 

   

5.b   

WATER INDICATOR 

When the water indicator is solid, the unit is pumping 
water to make ice. If the water level is too low, the 
indicator will flash and the unit will stop working au-
tomatically. Once you add water to the unit, the indi-
cator will turn off and the unit will resume normal 
operation.  
   

5.c   

WARNING INDICATOR  

This indicates that there is an error with the unit. 
(see Troubleshooting on page 11)  
 
6.  

WATER DISPENSING INDICATOR 

 

This indicator is displayed when the unit is  

 

dispensing water. 

7.  

TIMER BUTTON 

Press to program timer delayed switch ON or 
OFF function  

8.  

SELECT BUTTON 

Press to program ice size selection and timer. 

9.  

ON/OFF BUTTON 

Press to turn the unit on and off  

10.

ICE DISPENSER BUTTON 

Press button to dispense ice. Press again to stop 
ice from dispensing. 

11.

WATER BUTTON 

Press button to dispense water. Press again to 
stop water from dispensing. 

Summary of Contents for IDC-221SC













Reviews: