9
Installation and Operation
START / PAUSE Button
After desired operating time is set, press the START/PAUSE button to initiate operation. The LCD will display
the operation icon corresponding to the operation mode chosen
.
The unit can be paused by pressing the
START/PAUSE again. At pause, press START/PAUSE button and the machine will resume its unfinished
operation.
NOTE: The unit may enter a three minute compressor lockout when operation of the unit has been resumed.
This three minute time delay helps extend the life of the compressor. During the compressor lockout, only the
Mixing only icon will be displayed. Once delay elapses, the compressor will engage, ice cream icon will be
displayed, and the ice cream maker will start cooling again.
TIMER Button
Operation time can the selected by pressing the Timer Button in 1:00 minute increments. Pressing the timer
button will increase the operation time starting from the 05:00 minute mark up to 60:00 minute mark.
ICE CREAM MAKING
WARNING: Before first use, wipe the base of the unit with a moist cloth. Do not immerse the base in water. Wash
the lid, removable mixing bowl and churn blade in warm, soapy water to remove any dust or residue from the
manufacturing and shipping process. Please note that the parts are not dishwasher safe. Do not clean any of the
parts with abrasive cleaners or hard implements.
OPERATING INSTRUCTIONS
1.
Plug the unit into the power outlet. LCD screen will display “00” for
standby.
2.
Prepare ingredients (see pages 11 - 12 of the User Manual for
recipes).
Note: Please make sure that the pre-mixture does not exceed the
top dasher of the churn blade to avoid overflowing. See 2.a
3.
Place removable mixing bowl into the base. Be sure bowl is properly aligned. Make sure the outside of the
mixing bowl is completely dry before inserting it into the appliance.
4.
Place churn blade in the removable mixing bowl so that it rests in the center of the bowl.
5.
Pour mixture into the removable mixing bowl. When mixture is ready, position the transparent lid and lock
into place by turning it counterclockwise.
6.
Press the POWER button to turn the unit on.
7.
The timer will default to 60:00 minutes. Timer can be adjusted by pressing the timer button.
8.
Press the START/PAUSE button to begin. The timer will count down to 00:00 and the unit will beep three
times to indicate the mixture is ready
Tip: Additional ingredients such as nuts and fruits can be added towards the end of mixing time. Once the
mixture has begun to thicken (usually about 5 minutes from end time), add the ingredients through the Re-
fill Lid opening.
9.
Turn the unit off by pressing the POWER button. Remove the transparent lid by turning it clockwise to un-
lock. Lift removable mixing bowl out of the base with handle. Remove churn blade from removable mixing
bowl.
NOTE: If the unit is not powered off and removable mixing bowl is not removed from the unit after the oper-
ation time, it will go into an Extended Cooling Function.
EXTENDED COOLING FUNCTION
When the set operation time has elapsed (LCD displays "00:00"), the operation stops and the appliance will
beep 3 times. If the appliance is not turned off in ten minutes, it automatically enters into an Extended Cooling
Function to keep the ice cream frozen. In this function, the compressor will come on in six-minute cycles for two
hours. When done, the unit will beep 5 times to note that the Extended Cooling Function has completed. The unit
will go into Standby mode afterwards.
2.a
