12
WATER DRAINAGE INSTRUCTIONS
2. CONTINUOUS / GRAVITY DRAIN METHOD
Water can be automatically emptied into a floor drain by attaching the 20” continuous/gravity drain hose to the con-
tinuous/gravity drain outlet. To use gravity to drain your portable dehumidifier, it must be installed on a level surface
or at least 12 inches above the ground, on a sturdy table or shelf unit. When using the function of continuous/
gravity drainage, your drain hose must be placed horizontally below the drainage hole. Avoid uneven ground and
folding the hose.
NOTE: When using continuous/gravity drainage setup, there may be some water collected in the water in
the drain bucket
1. Remove the rubber drain cover from the con-
tinuous/gravity drain outlet at the back of the
unit.
2. Insert the continuous/gravity drain hose
through the continuous/gravity drain outlet.
Make sure the hose is securely fastened to
prevent leakage.
3. Direct the drain hose toward a drain or other
suitable drainage outlet. Make sure that there
are no distortions with the hose that may stop
the water flow.
4. Select the desired humidity setting and fan
speed on the unit for continuous draining to
start.
Fig.3
