![background image](http://html1.mh-extra.com/html/whynter/cdw-6831wes/cdw-6831wes_instruction-manual_978379012.webp)
12
CHECK BEFORE FIRST USE
The following things should be checked before starting the dishwasher.
1.
The dishwasher is level.
2.
The inlet valve is open.
3.
There is no leakage at the connections.
4.
The power is switched on.
5.
The inlet and drain hoses are not knotted to prevent restrictions.
6.
All packing materials and
manual
should be
removed
from the dishwasher.
Installation Instructions
Connect the quick connect assembly to the faucet
Disconnect and store your dishwasher
Remove Power
Turn off and unplug the dishwasher.
Remove quick connect assembly from faucet
Turn off hot water.
Relieve water pressure from the quick connect assem-
bly before disconnecting it from the faucet by depress-
ing the red pressure relief button. (Fig. 11b)
Depress the locking collar and remove the quick con-
nect assembly from the faucet. (Fig. 11c)
Drain excess water from the quick connect assembly.
If the sink is 34” or higher from the floor, the excess
water in the hoses cannot be drained directly into the
sink. It will be necessary to drain excess water from
hoses into a bowl or suitable container that is held
Set aside the quick connect assembly and hoses.
Store the dishwasher
•
Latch the dishwasher door closed.
•
Place the dishwasher into its
preferred
storage location.
Fig. 11b
Fig. 11c
Fig. 11d
NOTE:
The quick connect adapter’s small hose
carries water from the faucet to the dishwasher.
The large hose carries water from the dishwasher
to the sink. Orient the faucet with the quick connect
adapter attached so water from the quick connect
adapter will run into the sink drain.
•
Turn on the hot water faucet and check for leaks. If a
quick connect adapter leak
is
observed, take
whatever actions are necessary to repair the leak.
This may be as simple as tightening the faucet
adapter. Or, it may require the services of a plumber
if water is leaking from the interface between the
movable
faucet arm and the fixed part of the faucet
fastened to the sink.
•
Plug the dishwasher power cord into the electrical
outlet.
Fig. 11a
Note:
If the dishwasher is not in use, the quick connect assembly may be disconnected from the faucet.