1859GBCHb Cascade King Storage Bed
Assembly Instructions
This assembly requires two people.
1859GBCHb
— Page 10 — 04/14
9.
NOTE: There are blocks mounted on the back side of the Footboard to support the end of
the pedestal eliminating the need for a Assembled Foot in this position where it would be
easily visible. Do not attach an Assembled Foot in the position near the footboard.
Facing the Footboard, place an Assembled Foot (D) on the inside of the second set of Trestles
and attach with four Washers (K) and four 1/4" x 1-3/4" Hex Bolts (J). See Figures 9 and 9a.
Adjust all three Glides (F) found at the bottoms of the Assembled Feet so that the Glides just
touch the floor.
IMPORTANT: Make sure the Glides touch the floor and carry weight.
Fig. 9
J
K
x 4
x 4
Fig. 9a
Second set
of Trestles
K
J
F
K
D
J
