RAFIX
SYSTEM — 8/03
Rafix
Attachment System
Shoulder must
be flush with
the wood!
RAFIX BOLT
RAFIX CAM
TOP VIEW
1.
Insert the Rafix Bolt in the panel
so the shoulder is flush with the
surface of the wood.
2.
Tap a Rafix Cam into the appropriate
hole with the notch facing the
edge of the piece. The flat edge of
the cam must be parallel with the
front edge of the piece.
3.
Place the Rafix Cam over the
Rafix Bolt in the panel.
4.
Tighten the Cam about a half-turn
with a Phillips Screwdriver at a
25° angle.
Position the screwdriver at a 25° angle.
