5
1
General
Health & Safety legislation requires that rail lubricators are fitted by trained personnel only; warranty
will also be affected if un-trained teams work on the LubriCurve products.
Whitmore Rail provides suitable training courses.
This Manual should be used in support of training courses.
This Instruction Manual is intended to be generic and concentrates on the full range of LubriCurve
Electro 15 systems to suit flat bottom running rails, both top of rail and gauge corner / gauge face
applications; system install differences are highlighted as necessary.
Only lubricator greases or friction modifiers approved for use by Whitmore Rail and the rail user can
be used in these LubriCurve Electro 15 systems. Use of other greases or friction modifiers will
invalidate warranty and could affect operation.
2
Product Transport / Storage
Goods are packed and delivered to the requested address in a form that is suitable for the product,
given good practice in the off-loading by the receiving company.
LubriCurve systems are delivered on the basis that they will be installed within one month of receipt.
Delivered systems are not intended for outside storage, equipment should be off loaded and stored
inside a secure watertight building until required for installation.
All items are carefully checked prior to despatch and any damage or missing parts should be advised
to Whitmore Rail within five days of despatch from Whitmore Rail premises for consideration.
Note:
Keep the cabinet upright at all times from transport to install
