NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
30
Cat. No. H0368
Model Profi le 30 FS-2
Pellet Stove
Flue Size
3” (76 mm) Rear
Width, Overall
25-7/8” (657 mm)
Depth, Overall
24-7/8” (632 mm)
Depth, Overall w / 3” tee
30-3/4” (781 mm)
Height
31-3/8” (797 mm)
Floor to Rear
Flue Center
16-7/8” (429 mm)
Facing Back of Unit,
outside edge on right
to center of rear
fl ue outlet
5-1/8” (129 mm)
Floor to Rear
Outside Air Inlet
10” (254 mm)
Facing Back of Unit
outside edge on left
to center of air inlet
13” (330 mm)
Floor Protection
Front and Side: 6” (152 mm)
Requirements
Back: 1” (25 mm)
Standard Features
Fastfi re™ Self Igniter
Wall
Thermostat
(wire
included)
Hopper Capacity
70 bs.
Burn time
16 - 41 hours
Fuse, Control Board
5 Amp, 250 volt, 3AG
Fuse, Igniter
6 Amp, 125 volt
Heat Input (Max.)
14,000 - 38,000 BTU / hr
Overall Effi ciency
81%
Emissions
1.9 gr / hr (varies
w / size and type of fuel)
EPA
exempt
Ship Weight
270 lbs.
Room Air Blower
150 CFM; .8 Amps,
2175 rpm
Exhaust Blower
95 CFM: 1.0 Amps,
3000 rpm
Auger Motor
1.1 RPM; .4 Amps
Options
Nickel or Gold Trim Kits
4” Quick Disconnect
Log
Set
BACK VIEW
SIDE VIEW
Note:
Dimensions shown are approximations only (+/- 1/4”)
Non-combustible fl oor protection must be used when installed on carpet
(see Floor Protection,
Page 5
).
Fuel delivery and burn times will vary depending on size and type of fuel
used. Estimated heat input based on fuel value of 8400 BTU per lb.
Fuses are rated as fast blow.
10"
16-7/8"
31-3/8"
25-7/8"
8-7/8”
5-1/8”
13”
30-3/4"
24-7/8"
SPECIFICATIONS - PROFILE
®
30 FS-2
