White’s Electronics Prizm 6T, Owner'S Manual

Page: 16 / 32

16
Prizm™ 6T
Prizm™ 6T Multi Tone Display
6. Tone ID (Tone Identification) turns ON/OFF Tone ID, which provides
progressively higher pitch target beeps for targets progressively higher
up the nine target ID display categories. Press and release Tone ID to
turn ON/OFF. ON indicated by an icon shown on lower right portion of
display. At minimum DISC (all display categories set for acceptance “no
speaker with slash”) nine different tones indicate the display categories
from iron with the lowest pitch tone to large coins at the highest pitch
tone. Tone ID allows the operator to immediately be aware of the likely
category of metal item without looking at the display. Display categories
selected for rejection with DISC either produce no beep at all or a
broken inconsistent beep. A very low pitch beep with OL on display
indicates OVERLOAD (too much target signal) which does prevent
good target information. Lift the search coil a little higher and re-sweep
that area to see if the large target may still be of interest. When in the
P/P mode (P/P button held) or ALL Metal mode (P/P tapped and All
Metal appears on center of display). Tone ID button turns ON/OFF