WHITEHALL MANUFACTURING
• P.O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
3
Instructions for Operation and Care of Water Bath SP-1600-A
SET-UP INSTRUCTIONS
Operator trainees need to:
Ÿ
read and understand this manual.
Ÿ
be trained in occupational therapy protocols.
Training
Skills:
Operators using the Water Bath need a working
knowledge of occupational therapy procedures.
WARNING
!
Untrained operators can cause injury or be injured.
Only trained personnel should operate the Water Bath.
WARNING
!
OPERATOR SKILLS AND TRAINING
INSPECTING THE WATER BATH™
Ÿ
Is the outlet equipped with a functioning GFI?
Ÿ
Does the drain valve open and close properly?
Ÿ
Is a properly-grounded and voltage-matched
receptacle available?
Inspection Checklist
Ÿ
Is the Water Bath free of excessive wear?
—
Inspect the contents for damage.
If there is visible damage to the instrument upon receipt,
inform the shipping company and Whitehall immediately.
This Whitehall product has been carefully packaged at
the factory to minimize the possibility of damage during
shipping.
—
Inspect the packaging for external signs of
damage.
WARNING
!
Do not attempt to operate this equipment if there is
evidence of shipping damage or you suspect the unit
is damaged. Damaged equipment may present
additional hazards to you. Contact Whitehall technical
support for advice before attempting to plug in and
operate damaged equipment.
WARNING
!
2. Unpacking your Water Bath
Remove all shipping & packaging material. Remove all
items from inside of tank such as Power Cordset,
Warranty Registration Card, and Operation &
Maintenance Manual.
(1) Power Cordset
1. Your new Water Bath includes the following:
(1) Heating Appliance
(1) Operation & Maintenance Manual
NOTE: If you are missing any of the above,
contact WHITEHALL MANUFACTURING
toll free telephone no. (800) 782-7706 or (626) 968-6681
Place the Water Bath at a convenient height & location
such as on a table or scratch-resistant counter top.
IMPORTANT:
Appliance must be placed on a level
surface! Water Bath must be positioned so to allow ease
of disconnecting Power Cordset if necessary.
3. Location of your Water Bath
