WHITEHALL MANUFACTURING
• P.O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
2
The Water Bath has an illuminated ON-OFF power switch and a water-resistant temperature controller conveniently
located at the front of the appliance. The temperature is easily adjustable by turning the thermostat knob. Fuses and
power cord inlet are located on the right side of the appliance. A durable plastic lid handle is provided on the lid and helps
minimize contact with warm surfaces.
The unit is intended and designed to heat and soften thermoplastic splinting material at a user-entered set water
temperature. Proper splint material heat-up temperature & duration is based on the splint material manufacturer’s
requirements and instructions. The Water Bath is primarily constructed of Type 304 Stainless Steel material, is internally
insulated and has variable temperature settings with a LED display and a concealed wire-wound heating element.
The Water Bath is a water tank capable of heating water within a set temperature range of 113ºF (45ºC) to 200ºF (93ºC).
Model No. SP-1600-A
Electrical Specifications:
100-120 Volts • 50/60 Hz • 13 Amps
Inner
Tank Dimensions:
22" x 26" x 5" Deep (559 x 660 x 127 mm)
Inner Tank Capacity:
7.5 Gallons (28.5 Liters) 3" Deep water pool
Environmental conditions recommended 41ºF to 113ºF (5ºC to 45ºC) <90% RH
18"
(457)
31
3
4
" (806)
7
1
4
"
(184)
On/Off Power
Switch
Drain
Assembly
Temperature
Control Knob
8"
(203)
6
1
2
"
(165)
24
5
8
"
(625)
36" (914)
Power Inlet
Fuses
Instructions for Operation and Care of Water Bath SP-1600-A
