background image

18

PROGRAMMING YOUR THERMOSTAT

PROGRAMMING

Now you are ready to program your thermo-
stat. This section will help you plan and pro-
gram your thermostat to meet your needs.

For maximum comfort and efficiency, keep the
following guidelines in mind when planning
your program.

• When heating (cooling) your building, pro-

gram the temperatures to be cooler
(warmer) when the building is vacant or
during periods of low activity.

• During early morning hours, the need for

cooling is usually minimal.

PLANNING FOR YOUR NEEDS

This thermostat will store separate heating
and cooling programs for five-day (weekday)
and two-day (weekend) operation. Usually,
the five-day program is set to run Monday
through Friday, and the two-day program is set
to run Saturday and Sunday. However, you
may choose any five consecutive days to be
your weekday program days (such as Sunday
through Thursday; in this case, your weekend
program would run on Friday and Saturday).

First, you should answer the following ques-
tions to help you decide what your needs are.
If you are using the thermostat for a commer-
cial application (a store, office building, etc.),
answer questions 1 through 4. If you are using

Summary of Contents for 1F92W-71





































Reviews: