20
run until the set/setback temperature is
reached. After the cooling unit turns off,
it will not turn on again for at least six
minutes. After six minutes, the cooling
unit will turn on if the room temperature
is above the set/setback temperature
range. The cool indicator arrow on the
display will flash if the cooling unit is
waiting to turn on after the six-minute
minimum cycle time has expired.
You may temporarily override the
minimum timing cycle in three ways:
• Move the
temperature-set sliding
switch
at least 5
°
F from its current
position.
• Move the
system switch
from its
current position and back (for
example, moving the system switch
from
Heat
to
Cool
and back to
Heat
again will override the minimum
cycle time).
• Press the
reset button
to reset
programming and override mini-
mum timing cycle.
Pressing the
reset button will also cancel any
thermostat programming you have
done and reset the time of day to
12:00 PM
.