background image

24975-3-0311

Page 4

reQuIreMeNTS fOr cANADA

This unit 

cannot

 be installed in a UNVENTED application, this 

unit

 can only 

be installed as a VENTED application with these 

requirements.

IMPOrTANT SAfeTY INfOrMATION

This unit complies with ANSI Z21.60and CGA 2.26 Decorative 

Gas Appliances For Installation In Solid Fuel Burning Fireplaces. 

Do not burn wood or solid fuels in a fireplace where a decorative 

gas log set is installed. This appliance is for installation only in 

a solid fuel burning fireplace, masonry fireplace or manufactured 

fireplace.

warning: 

Any modification to this gas log set or to controls can 

be dangerous. Improper installation or use of the gas log set can 

cause serious injury or death from fire, burns, explosion or carbon 

monoxide poisoning.
1.  Please follow all local codes regarding installation, combus

-

tion and ventilation air or in the absence of local codes follow 

the National Fuel Gas Code ANSI Z223.1(U.S. installation), 

or CAN/CGA-B149, Installation Code (Canada installation).

2.  Proper installation, burner pan location and log placement is 

important to achieve optimum look and performance of your 

gas log set. The logs have been designed for easy location 

and placement on the grate and must be followed for proper 

operation.

3.  Do not operate this log set with glass doors in the closed po-

sition. A fireplace screen must be in place when the log set 

is  burning. Adequate  combustion  air  must  be  provided  for 

proper venting. All flames should go up and out the top of the 

firebox into the flue vent. If any flames float or curl forward 

into the room do not operate appliance. Check for an open 

flue and adequate combustion air into the room. A damper 

clamp must

 be installed on the firebox damper to maintain an 

open flue vent condition.  See fireplace instructions manual 

for installing damper clamp.

4.  Young children must be carefully supervised when they are 

in the same room as the gas log while in operation. Do not 

place stockings, clothing or any flammable material above or 

near the fireplace.

5.  Do not substitute or use materials other than those supplied 

for use with the log set.

6.  Also refer to  IMPORTANT SAFETY INFORMATION on 

page 3 of this manual

WARNING;  DO  NOT  OPERATE  THIS  GAS  LOG  SET 

wITH gLASS DOOrS cLOSeD

•  Clothing or other flammable material should not be placed on 

or near the appliance.

•  Do not place trash or other articles on the log set during op

-

eration.

•  During  manufacturing,  fabricating  and  shipping,  various 

components  of  this  appliance  are  treated  with  certain  oils, 

films or bonding agents. These bonding agents are not harm

-

ful but may produce annoying smoke and smells as they are 

burned off during initial operation of the appliance. This is a 

normal temporary occurrence. A window should be opened 

during the initial bake out period. 

•  Keep burner and control compartment clean. 

• 

wArNINg: 

Before  installing  in  a  solid  fuel  burning  fire

-

place, the chimney flue and firebox must be cleaned of soot, 

creosote, ashes and loose paint by a qualified chimney clean

-

er.

•  Installation and repair should be done by a qualified service 

person. The appliance should be inspected before use and at 

least annually by a qualified service person. More frequent 

cleaning may be required due to excessive lint from carpet

-

ing, bedding materials, etc. It is imperative that control com

-

partments, burners and circulating air passageways of the ap

-

pliance be kept clean.

• 

Do not

 put anything around the fireplace that will obstruct 

the flow of ventilation air.

• 

Do

 keep the appliance area clear and free from combustible 

material, gasoline and other flammable vapors and liquids.

•  A yearly examination and cleaning of the venting system of 

the solid-fuel burning fireplace must be performed by a quali

-

fied agency.

• 

Do

 make a periodic visual check of pilot and burners. Clean 

and replace damaged parts.

• 

Do not

 use this appliance if any part has been under water. 

Immediately call a qualified service technician to inspect the 

appliance and to replace any part of the control system and 

any gas control which has been under water. 

•  Never burn solid fuels in fireplace where a gas log set is in

-

stalled.

•  This  unit  complies  with  ANSI  Z21.60  Decorative  Vented 

Appliances for Solid Fuel Burning Fireplaces. State or local 

codes may only allow operation of this appliance in a vented 

configuration. Check your state or local codes.

Summary of Contents for Morgan Creek LS-18MC-1













Reviews: