33740-9-1015
Page 47
33740-9-1015
Page 46
MULTIFUNCTION REMOTE OpERATING INSTRUCTIONS
The Thermostat Feature may be disabled if desired.
With all three AAA type batteries installed:
1. Take out one AAA battery.
2. While re-inserting the AAA battery, Push and hold down the
thermostat button. This will disable the thermostat feature on
the transmitter.
Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room thermostat. The
thermostat can be set to a desired temperature to control the
comfort level in a room. To activate this function, press the Ther-
mostat Button
(Figure 56)
. The LCD display on the Transmitter
will change to show that the room thermostat is “ON” and the
set temperature is now displayed.
See Figure 67.
To adjust the
set temperature, press the Up or Down Arrow Buttons until the
desired set temperature is displayed on the LCD screen of the
Transmitter.
See Figure 68.
SET TEMPERATURE
ROOM TEMPER ATURE
Figure 67
Figure 68
Smart Thermostat (Transmitter Operation)
The Smart Thermostat function adjusts the flame height in ac
-
cordance to the difference between the set point temperature
and the actual room temperatures. As the room temperature gets
closer to the set point the Smart Function will modulate the flame
down. To activate this function, press the Thermostat Button until
the word “SMART” appears to the right of the temperature bulb
graphic.
See Figure 66
. To adjust the set temperature, press the
Up or Down Arrow Buttons until the desired set temperature is
displayed on the LCD screen of the Transmitter.
See Figure 70.
Note
: When Smart Thermostat is activated, manual flame height
adjustment is disabled.
Figure 69
Figure 70
Blower Control (Fan)
If the appliance is equipped with a hot air circulating fan, the
speed of the fan can be controlled by the Proflame system.
The fan speed can be adjusted through six speeds. To activate
this function, use the Mode Button
(Figure 56)
to index the fan
control icon.
See Figure 71
. Use the Up/Down Arrow Buttons
(Figure 56)
to turn on off or adjust the fan speed.
See Figure 72
.
A single “beep” will confirm reception of the command.
OFF
Figure 71
OFF
Figure 72
MULTIFUNCTION REMOTE OpERATING INSTRUCTIONS
Remote Dimmer Control (Light)
The auxiliary function controls the AUX power outlet by the dim-
mable light control. To activate this function, use the Mode Button
(Figure 56)
to index to the AUX icon.
See Figures 73 and 74.
The intensity of the output can be adjusted through six levels.
Use the Up/Down Arrow Buttons
(Figure 56)
to adjust the output
level. A single “beep” will confirm reception of the command.
Note
: This function is available only with the IFC control Module.
OFF
Figure 73
OFF
Figure 74
